OEM Fine Cut 6

GM-TECH OEM Fine Cut 6 is Finishing Polish Compound for automotive body shop paint correction. The OEM Fine Cut provides excellent gloss with nano-technology polish abrasives that will allow longer polishing time with a Rotary machine after using GM-TECH Abrasive Cutting Compound GM-1 Extra.

​

GM-TECH OEM Fine Cut 6 is safe for all 2K, Solid, Metallic and OEM automotive paintwork. Suitable with Foam Buffing Pads and Finishing Pads.

​

DIRECTIONS

​DO NOT APPLY THE COMPOUND UNDER DIRECT SUNLIGHT OR ONTO A HOT SURFACE.

1. Shake Well before Use.

2. Spread product on clean cool surface.

3. ROTARY: Use Soft or Finishing Polishing Foam Pad at approximately 700 – 2300 rpm until defects are removed. DUAL ACTION: Use Light Cut or Soft Orange Finishing Foam Pad at approximately speed level 3 - 4 until defects are removed.

4. Inspect paintwork and ensure surface is not too hot to touch, allow surface to cool before continuing. If there is still defect, repeat buffing process